Path Settings - Apexis IP Wireless / Wired Camera User Manual

3.20 Path Settings

Figure 10.8
Here you can set record path and alarm record path for the camera
Record Path: Here you can set the manually record path. Click
record file will be saved to the specified path here set.
Alarm Record Path: Here you can set the alarm record path. When the motion triggered, and record enable, it
will start alarm record automatically, the record file will be saved to the specified path here set .
NOTE: If you couldn't set the path here in Windows 7 or Vista, please do it as below:
Windows7 or Vista's security level is higher than Windows XP/2000, for "Path Settings"
1. User could add the Device IP address to the IE's 'Trusted sites' firstly. The step is:
"IE browser→Tool→Internet Proper→Security→Trusted sites→Sites→Add".
2. You can also run the IE as administrator, input the IP address of the camera manually. (Figure 11.1)
Shenzhen Apexis Electronic Co., Ltd
More Security, More Convenience
Figure 10.9
Figure 11.0
Figure 11.1
Tel: +86-755-26509025
www.apexis.com.cn / www.apexis.cc
.
, then start manually record, the
48
Fax: +86-755-26509229