Ftp Service Settings - Apexis IP Wireless / Wired Camera User Manual

If it prompts these following errors when you click Test. Please check whether the information you filled in are
incorrect. Make sure all of them are correct and try it again.
1) Can not connect to the server
2) Network Error. Please try later
3) Server Error
4) Incorrect user or password
5) The sender is denied by the server. Maybe the server need to authenticate the user, please check it and try
again
6) The receiver is denied by the server. Maybe because of the anti-spam privacy of the server
7) The message is denied by the server. Maybe because of the anti-spam privacy of the server
8) The server does not support the authentication mode used by the device
Report Internet IP by Mail: If select it, you will receive emails which contain the camera's internet IP. When
camera power on or Internet IP changed, it will send the internet IP by mail. (For example: IPCAM's URL is
http://121.213.109.69:1008).

3.17 FTP Service Settings

Set the FTP Service, you can upload images to your FTP server when motion detection triggered .
FTP Server: If your FTP server is set up in LAN. You can set as Figure 9.3
If you have a FTP server can be accessed from internet. You can set as Figure 9.4
Shenzhen Apexis Electronic Co., Ltd
More Security, More Convenience
Tel: +86-755-26509025
www.apexis.com.cn / www.apexis.cc
Figure 9.3
Figure 9.4
42
Fax: +86-755-26509229