Related Manuals for Apexis J011
Summary of Contents for Apexis J011
-
Page 1: Quick Installation Guide
Quick Installation Guide (For MAC OS) More Security, More Convenience www.apexis.cc www.apexis.com.cn tech@apexis.com.cn... - Page 2 Bracket * 1 Power Supply * 1 Screw * 1 set Antenna * 1 Installation Guide * 1 (Note: Antenna is for WIFI model only) This Quick Installation Guide is for below models: J011 J012 J802 J803 J0233 J601 J602...
- Page 3 . How to Connect Connect Power Adapter to device. Connect Camera to Router with Cable ,Connect Antenna to WIFI port and screw it. Ⅲ. LAN view Step 1: Put the supplied CD into the CD-ROM. Step 2: Find the folder , copy the total file to your MAC, and then you can use the “IP Camera Tool”.
- Page 4 tep 3： Double click the IP Camera Tool and you could see the following picture. The IP camera tool could find the cam’s IP automatically after you plug the network cable. If not, Please make sure that DHCP is enabled in your router. Don’t enable MAC address filter.
- Page 5 Step4: Double click the IP address to view the camera, you can find below: Step 5: Choose “Server Push Mode” to view the camera...
- Page 6 、WAN View Step 1 : Go to Network – Basic Network Settings to find the IP address and http port of the camera . you can change the setting here and then click Submit . Please make sure only the blue area of the IP camera is differ as PC , other setting should be exactly the same .
- Page 7 Step 2：Login Router (Port mapping/Port forwarding) Please refer to the router's specifications, Access your router and find the【Virtual Sever】or【Port Forwarding】 settings (Below taking D-link for example) As shown on above figure, enter the IP address and port you set, then save the settings .
- Page 8 Step 4： After setting is ok, you can view the network camera. If you want other settings, please reset other parameters according to the user manual in the CD .
Need help?
Do you have a question about the J011 and is the answer not in the manual?
Questions and answers