Mail Service Settings - Apexis IP Wireless / Wired Camera User Manual

FTP Upload, Alarm Mail Alert, Record Path etc.

3.16 Mail Service Settings

Set Mail Service Settings to enable the camera send email alert when motion detection triggered.
Sender: Make sure the sender mailbox server provider support SMTP, and the mailbox should not enable SSL
or TSL encryption too.
Receiver: Here you can set four receivers. For receiver, there is no SMTP limitation.
SMTP Server: The sender's SMTP Server.
SMTP Port: The sender's SMTP Port, usually is 25, some SMTP server have its own port such as 587.
Need Authentication: If there is SMTP user & password, please select authentication.
SMTP User: Input correct SMTP User here. Some SMTP User is the sender's full email address, such as
test@qq.com, some are without suffix, only the username, such as test.
SMTP Password: Input correct SMTP password here.
NOTE: Please click Submit firstly before choosing Test.
You will see the test result after click Test.
Shenzhen Apexis Electronic Co., Ltd
More Security, More Convenience
Tel: +86-755-26509025
www.apexis.com.cn / www.apexis.cc
Figure 9.1
Figure 9.2
41
Fax: +86-755-26509229