C-MOR
1.3
Setup of C-MOR
Make sure that the device is set up on a safe and even surface where it is not exposed to intensive
humidity or extreme variations in temperature. C-MOR must not be exposed to direct sunlight. For
safety reasons C-MOR should be set up where only authorized personnel has access. Your recordings
are only safe if C-MOR is protected from demolition and theft!
Connect C-MOR to the power supply using the power cable and to the network using the network cable
(2 m).
1.4
Setup of Existing Network
Connect the LAN of C-MOR with your network. C-MOR will be ready for operation as soon as you have
specified an IP address. The IP address can simply be set on the VGA Console:
User Manual
Page 6