Table of Contents
Advertisement
C-MOR
3.2
Camera Configuration
3.2.1 General Description of Configuration Options
In order to configure a camera the following settings can be carried out:
Define description of the camera's location
Activate / deactivate recordings
Define camera network data
Configuration of camera type (Axis, Mobotix, Panasonic, Sony, etc.)
Threshold for motion detection
Parameters for motion detection. Different values have to be defined depending on the
image.
Fast Motion Permanent Recording
Besides motion detection it is possible to create a permanent recording. This mode generates a
movie with images that are recorded in the given interval.
Recording mode for timelapse recordings
This parameter defines the time and days after a new recording will be started for timelapse
recordings.
Creation of JPEG images with motion detection
Apart from MPEG files with motion detection there are also single JPEG images recorded. These
images can be easily saved with a ZIP archive.
Record single JPEG pictures beside timelapse permanent recordings
Enable permanent single picture recordings beside timelapse permanent recordings. The images
can be easily saved as ZIP archive.
Intervall for Permanent Single Picture Recording
Single Picture Recordings for permanent pictures are recorded in the specified interval.
Number of images Pre-Recording
Number of images that are placed at the beginning of the movie in case of motion detection.
Number of images after Recordings
Number of images that will be added to the movie after the motion during motion detection
User Manual
camera
Page 43
Advertisement
Table of Contents
