C-MOR IP Video Surveillance User Manual page 56

C-MOR
If the PTZ configuration of the selected camera was loaded, the second step follows for the configuration
of the PTZ control: The setup of the login data for the camera and the setting for the camera rotation.
If the camera was fixed on a ceiling, which has the effect, that the camera is upside down, the PTZ
control has to be configured with the rotation of 180 degrees. Otherwise the PTZ commands will
navigate to the wrong direction.
Of course the loaded PTZ commands can be adjusted. If a camera has a configurable pan or tilt setting,
so the command can be adjusted with your own requirements.
User Manual Page 56