C-MOR IP Video Surveillance User Manual page 45

C-MOR
Text on left side in cam picture
This optional text will show up in the left lower corner of the camera picture. If this field is empty
no text will be shown.
Show picture text in double size
The text in the camera picture can be shown in double size. This is useful for big pictures or
special usage of the pictures.
Web camera picture quality
Picture quality in percent for the data transfer of the camera picture to C-MOR. The default value
is 50%. Changing this parameter may cause a high system load which can cause system
failures.
JPG picture quality
Single picture quality in percent for the JPEG images which are saved on C-MOR. The default
value is 100%.
Time between two events
Time in seconds without motion, after a new motion movie will be recorded.
Bitrate of picture transfer from camera
The bitrate factor defines the variable bandwidth for the picture transfer from the camera to C-
MOR. The value 2 is the fastest with the best quality. For pictures with high amount of data this
value has to be rised to avoid C-MOR gets overloaded and stops recording. High values also
reduce the picture quality.
Minimum number of pictures with changes for Motion Detection
The number of pictures with changes to detect motion. The value 1 is capable in the most cases.
This means only one picture is compared to detect motion.
Sudden light intensity
Ignore sudden massive light intensity changes given as a percentage of the picture area that
changed intensity.
User Manual Page 45