C-MOR IP Video Surveillance User Manual page 53

C-MOR
Image Mask for the Definition of the Areas for Motion Detection
C-MOR reacts to motion in the complete camera image. This might require some kind of limitation so
that not every kind of motion leads to motion detection. Examples for that can be cars driving by or
pedestrians at property lines. By using this function a black & white mask can be loaded. By the help of
this mask C-MOR will only carry out motion detection in the respective white areas. The black & white
mask can be created as follows: please start with creating a white image of the size of your camera
resolution. Those areas where no motion detection should be effected, please add black layers. Then
please save the graphic as a JPG file and upload it to C-MOR. All black areas will then be ignored in
terms of motion detection. Please also see the information on the following page.
C-MOR then lays the mask over the image section.
User Manual
In this example cars driving by would trigger
motion detection.
In order to prevent this, please create a
mask of the same size and upload it to your
C-MOR.
The black area will now be ignored during motion
detection.
Page 53