Usage Of The Ptz-Control - C-MOR IP Video Surveillance User Manual

C-MOR
Next to the control commands for pan, tilt and zoom, moveable cameras usually own the function to set
up pre-defined positions. These positions can be stored in the PTZ menu, too. The pre-defined positions
commands you will find in the C-MOR web forum or by asking the C-MOR support team.
If the PTZ commands are configured, at least you have to activate the PTZ control over the camera
Menu.
3.2.5 Usage of the PTZ control
If the PTZ function is activated for a camera, the control icons will be shown on the camera web pages
automatically.
User Manual Page 57