C-MOR IP Video Surveillance User Manual page 44

C-MOR
Intervall of images for motion detection recordings
Number of images per second during the recording with motion detection. Please select this
parameter carefully as a too high number of frames with a very high resolution can overload the
system.
Rotation of Image
Please choose the recording mode. A 180 degrees recording makes e.g. sense in case the cam
is installed on the ceiling down sided.
Maximum Time of recording for Motion Detection
This value shows how long a movie with motion detection may last (maximum). This makes
sense in case of a query via internet as individual movies can be displayed much faster due to a
lower download data.
Display Frame around changed Pixels
This parameter defines whether a frame will be displayed around changed pixels. This is very
helpful in case the threshold for the motion detection for the cam image is defined.
Display Text with time and date in cam image
Feature for the activation and deactivation of the display of time and date in the cam image.
Automatic E-Mail alarm during Motion Detection
Feature for the activation and deactivation of the E-Mail alarm in case motion has been detected
by the cam. A plain text E-Mail will be sent (excluding image or movie attachment).
Please note: in case of a lot of motion and many recordings that are effected during motion
detection your mailbox might reach its storage limit very fast and cannot receive emails any
more!
E-Mail address for alarm E-Mails
This is the E-Mail address alarm mails are sent to.
Attach Motion Detection recordings to alarm E-Mail
Set this to on if recordings of events should be send as attachment of alarm E-Mails.
Direct Cam Link
Network Cams might be linked directly over C-MOR. This setting is needed when network
cameras are not located at the same location and are only accessible behind a router through the
internet.
User Manual Page 44