Calendar Search - Digimerge DHU500 Series Quick Setup Manual

DHU500 Series - Quick Setup Guide
5. CAMERA & RECORDING
SETUP
BASIC RECORDING MODES :
1. NORMAL RECORDING
2. MOTION RECORDING
PROCEDURE
• Press the MENU button.
• Enter the password (default is 00000000).
• Scroll down to the RECORDING SET menu and press
SEL. Enter the password (default is 00000000).
Note: Make sure the DVR it is not currently in REC
Mode.
A. CAMERA RESOLUTION.
•
Select the GLOBAL PARAMETER option.
•
Scroll to the RECORDING RESOLUTION option.
•
Select the RECORDING RESOLUTION (360 X 240
or 720 X 240).
•
Select SAVE & EXIT.
B. RECORDING MODES
1. NORMAL RECORDING
•
Select the RECORDING SET MENU. Enter the
password.
•
Select the NORMAL RECORDING option.
•
Scroll down to the desired CAMERA and press
SEL. Adjust the FPS & QUALITY using the UP &
DOWN buttons. Use the left and right buttons to
move to the next field. When finished, press the
SEL button.
•
Select SAVE & EXIT to exit.
2. MOTION RECORDING
•
Select the RECORDING SET MENU. Enter the
password.
•
Select the MOTION RECORDING option.
•
Scroll to the desired camera and press SEL. Adjust
the FPS and Quality using the UP & DOWN
buttons. Use the left and right buttons to move to
the next field. When finished press SEL.
•
Set the POST MOTION for the duration of the
event.
•
Select the SETUP MOTION option if you wish to
adjust the Detection Area and Sensitivity of each
camera (for more information, refer to the User
Manual provided with your DVR unit).
•
Select SAVE and EXIT to finish.
MAIN MENU
▶DISPLAY SET
RECORDING SET
SYSTEM SET
NETWORK SET
EVENT NOTIFICATION
Main Menu
RECORDING SET
▶GLOBAL PARAMETER
NORMAL RECORDING
ALARM RECORDING
MOTION RECORDING
SCHEDULE RECORDING
RECORDING ON/OFF
Recording Set Menu
NORMAL RECORDING (4 CH ONLY)
CH / FPS / QUALITY
▶CH1 : 30 : HIGH
CH2 : 30 : HIGH
CH3 : 30 : LOW
CH4 : 30 : MID
SAVE & EXIT
1. Normal Recording Menu
MOTION RECORDING (4 CH ONLY)
CH / FPS / QUALITY
▶CH1 : 30 : HIGH
CH2 : 30 : HIGH
CH3 : 30 : LOW
CH4 : 30 : MID
POSTMOTION DURATION : 150
SETUP MOTION
SAVE & EXIT
2. Motion Recording Menu
6. PLAYBACK & SEARCH
To playback video on the DHU unit you have two options – LAST EVENT and SEARCH
MODE:
1. LAST EVENT: To replay the last event, press the PLAY button. The DVR unit will start
playback at the most recently recorded event. Select a CAMERA number (on the front panel
of the DVR) to view the camera in full screen mode. Pressing the PLAY button again will
increase the playback speed by 2x, 4x, 8x etc. To end the Playback, press the STOP button
2. SEARCH MODE.
• Press the Search button. Options include:
o DATE/TIME SEARCH
CALENDAR SEACH
o
DATE TIME SEARCH
EVENT: Select this option to playback events for:
• ALL (All recorded event types).
• ALARM (Alarm type events only).
• MOTION (Motion type events only).
HDD: Select INTERNAL or EXTERNAL hard drive.
DATE: Select desired DATE/TIME. To modify the current
values press SEL. Select the DATE & TIME using the
numeric buttons of the front panel of the DVR. Use the left
and right arrows to select next field. Press SEL to end the
date selection.
PLAY: Select this option to start the PLAYBACK
of the selected event.

CALENDAR SEARCH

Select this option to playback events by
searching in calendar mode.
• On the MENU select the desired
YEAR and MONTH.
• Press SEL to access the days on the
calendar. Scroll to the desired
recorded date (indicated by
brackets) and press SEL.
• A second menu will be displayed, and
recorded data will appear
recording indicator bars for each
camera.
• Use the LEFT and RIGHT arrow keys
to select the HOUR, and press SEL to
access a third menu to select the
MINUTES.
• Press SEL to begin playback.
SEARCH
▶DATE/TIME SEARCH
CALENDAR SEARCH
BACKUP
LOG
DATE/TIME SEARCH
▶EVENT
: ALL
HDD : INTERNAL
DATE : 1-1-2006 1:10:50
PLAY
CALENDAR SEARCH
▶YEAR
: 2006
MONTH : 11
SUN MON TUE WED THU FRI SAT
1 2 [3] 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30
[ ]
SEARCH RESULT
DATE 11-12-2004
HOUR 0 4 8 12 16 20
with
▲
CH1
CH2
2
CH3
CH4