4.2.1 Motion detection
• Set the motion detection area, sensitivity and alarm for each camera video. Press the [Enter] button after
moving the cursor on the camera to be set.
[Motion Link Setting]
• You can set a motion-link recording for each camera.
• When the camera detects movement in the motion-detection area, the linked camera will begin
recording as well, regardless of its recording schedule.
• To use Motion-link recording, the camera detecting the movement must be set to Motion-
Detection recording in the schedule. If the camera's schedule is set to Continuous Recording,
Motion Link will be disabled.
• In Surveillance mode, when the camera detects movement in its motion-detection area, the
linked camera channel will flash 'REC' and begin recording.
• To access Motion Link Setting, use the mouse or the directional keys to select [Setting].
[Motion Camera]
• Select the camera that will detect the movement in its motion-detection area by using the mouse
wheel or the [◀, ▶, I◀, ▶I ] button on the system.
[Link Camera]
• Select the cameras that will be linked to the [Motion Camera] by using the mouse or the
directional keys. You can link multiple cameras to the selected [Motion Camera].
40
40
KSR
KSR
-
-
304N
304N