4. Adding HDD
4. Adding HDD
4.1 Installing new HDD
• Turn the system off and install the new HDD into the
system.
• Turn the system back on and wait for the HDD
format message.
• The message will ask you to confirm HDD format.
HDD format is a necessary procedure before using the
newly installed HDD.
• Press [Yes] button to being formatted the new HDD.
Pressing [No] button will cancel HDD format and
shutdown the system.
• Once the system begins formatting the HDD, you
can view the progress through the progress bar.
• Once HDD is complete, the system will restart.
☞
☞
[Note]
• Before attaching a new HDD to the
system, you are recommended to check
both the original HDD and the new HDD
interface jumper and set the MASTER
and SLAVE.
• Any newly installed HDD must be
formatted
• Remember that formatting will erase
any data stored on the new HDD. Please
make sure you have saved any important
data before proceeding with HDD format.
105
105
KSR
KSR
-
-
304N
304N