Alarm In Setting - Kodicom KSR-304N User Manual

[Channel No/Alarm In No]
• Set the channel/alarm number to monitor.
[Source Preset]
• Sets the initial PTZ preset location.
[Target Preset]
• Sets the target PTZ preset location.
[Duration Time]
• 10~300 SEC : Set the delay time at the target preset position before returning to the source preset.
• OFF : Automatically returns to the initial position.

4.3.2 Alarm In Setting

• Configure Alarm In type Normally Open and Normally Close setting and beep option.
[Alarm In]
• Select the Alarm In number for configuration.
[Signal Type]
• The Alarm In type can be set to "Normally Open", or "Normally Close".
• Normally Closed type = If the door/object with the Alarm In installed is not closed, the Alarm In will trigger.
• Normally Open Type = If the door/object with the Alarm In installed is not opened, the Alarm In will trigger
[Beep]
• When Alarm In are triggered, the system will produce "Beep" alarm sound through its internal speakers.
Select "ON" to enable alarm, and select "OFF" to disable it.
50 50 KSR KSR - - 304N 304N