Group Setup - Kodicom KSR-304N User Manual

[User Add]
Enter "User ID" and "Password" for the User. Then select the group that the user has permission, there are
three options "Group1", "Group2", and "Group3".
• If you press "Add", the entry is registered and displayed in the user list on the right.
• If you press "Clear", then User ID and Password details entered on the left are deleted.
[User Delete]
• First select a User ID to be deleted from the user list on the right, select it by pressing the "Enter" button.
• If you press "Delete", only the selected User ID is deleted from the list.
• If you press "Delete All", all the User IDs registered to the list are deleted.

4.5.1.3 Group Setup

• Change the parameters set to each group.
[Group]
• There are 3 user group levels, so each group can be set with different permission for system set up and
search modes.
[Menu]
• Check "Recording" to enable set-up permission to Motion detection, Schedule, Quality/Resolution,
Property.
• Check "Camera" to enable set-up permission to Channel setting, Alarm In Setting, Alarm In/Alarm Out link,
Alarm In/Camera link, Spot Out/Camera link.
• Check "Network" to enable set-up permission to DDNS Setup, Network Setup, Network Test, NTP Setup,
Emergency Notification.
• Check "System Setup" to enable set-up permission to User Management, Site Setup, Software Upgrade,
Schedule, Storage.
• Check "System Info" to enable set-up permission to Log Info, Factory Default, System Shutdown/Restart.
[Search]
• Check "Playback" to enable search.
• Check "Backup" to set up the JPEG/BMP, KDB and SFX backup and remote backup for any image saved.
[Network]
• Check "Network" to grant remote access to the DVR.
66 66 KSR KSR - - 304N 304N