Tools And Materials Required; Remove The Packaging - GE Monogram ZV800 Installation Instructions Manual

Installation Preparation
TOOLS AND MATERIALS REQUIRED
(NOT SUPPLIED)
[] Tape measure
[] Knife
[] Spirit level
[] Wire cutter/stripper
[] Wire nuts
[] Electric drill with 1/8"and 3/8" bits
[] Phillips and flat blade screwdrivers
[] Hammer
[] Pliers
[] Safety glasses
[] Duct tape
[] Tape to mount template
[] Gloves to protect against sharp edges
[] 120V60Hz.15 or 20 Amp, 2 wire with
ground Properly grounded branch circuit
[] Strain relief for junction cover
[] 6" round metal duct, length to suit
installation
[] Saw or jig saw
[] Conduit for house wiring
and conduit connector
Measuring Tape
Pliers
Duct Tape
Strain relief for
junction cover
Spirit level
Electric drill
with 1/8" and
3/8" Bits
Safety glasses
Phi_ Flat blade
head "_ screwdriver
screwdriver
Wire nuts
Masking tape Conduit
Gloves
Knife
Wire
cutter/stripper
Hammer
Saw or jig saw
REMOVE THE PACKAGING
2-piece duct
cover
• Remove the duct cover, parts box and other
packaging.
• Lift the hood out of the box.
• Remove and properly discard the plastic wrapping.
• Remove junction box cover.
6