Step 4, Prepare The Hood; Step 5, Mount The Hood - GE Monogram ZV800 Installation Instructions Manual

Installation Instructions
WALL-MOUNTEDINSTALLATION--VENTEDTO THE OUTSIDE
I_ PREPARE THE HOOD
• Remove the hood from the box. Remove packaging
and tape,
_ <--- Remove2 side
Y
Electrical j cover screws
panel _- u
• Remove one screw on each side of the cover on the
electrical panel. Lift off the cover and set aside with
screws.
=_----- J un ction box
,ii- Inside screw
Secure
electrical panel
with 3 screws
• Stand the electrical panel upright.
• Align the screw holes in the bottom of the panel with
the holes on the base of the hood atthe front side.
• Install 3 screws provided.
• Snap the damper into the Install
exhaust outlet on the top damper
of the hood,
[_ MOUNT THE HOOD
Install a wood screw
on each side of the
mounting frame _
Mounting
b racket
• Lift the hood onto the mounting bracket.
• Check to be sure it is level.
• Install wood screws through the hood and into the
wall on each side of the mounting bracket,
Install bottom
mounting
screws
• Extend the canopy forward for better access to the
rear mounting screw holes.
• Install 2 wood screws or fasteners through the
bottom of the hood into the wall,
11