The Access Control Screen; Figure 30: The Wireless > Access Control Screen - Hitron CGN2 User Manual

Table 27: The Wireless > Setup Screen (continued)
Cancel
Help
6.3

THE ACCESS CONTROL SCREEN

Use this screen to configure Media Access Control (MAC) address filtering on the
wireless network.
NOTE: To configure MAC address filtering on the wired LAN, see The Filter Setting
Screen on page 57.
You can set the CGN2 to allow only certain devices to access the CGN2 and the
network wirelessly, or to deny certain devices access.
Click Wireless > Access Control. The following screen displays.
Figure 30: The Wireless > Access Control Screen
93 93
HITRON CGN2 USER'S GUIDE
Click this to return the fields in this screen to their last-
saved values without saving your changes.
Click this to see information about the fields in this
screen.
Version 2.0, February 2012. Copyright
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
2012 Hitron Technologies