Hitron CGN2 User Manual page 36

Table 8: The Status > System Info Screen (continued)
WAN Information
WAN Address
Subnet Mask
Gateway Address
DNS Server
Uptime
Traffic Count
Wireless Information
SSID
Wireless Mode
Channel
Security Type
Cipher type
SSID MAC
LAN Status
MAC Address
36 36
HITRON CGN2 USER'S GUIDE
This field displays the CGN2's IP address on the WAN
(Wide Area Network) interface.
This field displays the CGN2's WAN subnet mask.
This field displays the address of the device on the WAN
to which the CGN2 is connected.
This field displays the Domain Name Servers that the
CGN2 uses to resolve domain names into IP addresses.
This displays the number of hours, minutes and seconds
that the CGN2 has been connected to another device over
the WAN interface.
This displays the number of bytes received and sent on
the WAN interface.
This displays the wireless network's Service Set Identifier.
This is the name of the wireless network, to which wireless
clients connect.
This displays the type of wireless network that the CGN2
is using.
This displays the wireless channel on which the CGN2 is
transmitting and receiving.
This displays the type of security the CGN2's wireless
network is currently using.
This displays the type of encryption that the wireless
network's security is using:
TKIP displays if it is using the Temporal Key Integrity

Protocol.
AES displays if it is using the Advanced Encryption

Standard.
TKIP and AES displays if it allows clients using either

encryption type to connect to the CGN2.
This displays the Media Access Control (MAC) address of
the wireless module, to which wireless clients connect.
This displays the Media Access Control (MAC) address of
the CGN2's Ethernet module. This is the module to which
you connect through the LAN ports.
Version 2.0, February 2012. Copyright
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
2012 Hitron Technologies