Wireless Security; Wps - Hitron CGN2 User Manual

6.1.5

WIRELESS SECURITY

Radio is inherently an insecure medium, since it can be intercepted by anybody in the
coverage area with a radio receiver. Therefore, a variety of techniques exist to control
authentication (identifying who should be allowed to join the network) and encryption
(signal scrambling so that only authenticated users can decode the transmitted data).
The sophistication of each security method varies, as does its effectiveness. The
CGN2 supports the following wireless security protocols (in order of effectiveness):
WEP (the Wired Equivalency Protocol): this protocol uses a series of "keys" or

data strings to authenticate the wireless client with the AP, and to encrypt data
sent over the wireless link. WEP is a deprecated protocol, and should only be
used when it is the only security standard supported by the wireless clients.
WEP provides only a nominal level of security, since widely-available software
exists that can break it in a matter of minutes.
WPA-PSK (WiFi Protected Access - Pre-Shared Key): WPA was created to

solve the inadequacies of WEP. There are two types of WPA: the "enterprise"
version (known simply as WPA) requires the use of a central authentication
database server, whereas the "personal" version (supported by the CGN2)
allows users to authenticate using a "pre-shared key" or password instead.
While WPA provides good security, it is still vulnerable to "brute force"
password-guessing attempts (in which an attacker simply barrages the AP with
join requests using different passwords), so for optimal security it is advised that
you use a random password of thirteen characters or more, containing no
"dictionary" words.
WPA2-PSK: WPA2 is an improvement on WPA. The primary difference is that

WPA uses the Temporal Key Integrity Protocol (TKIP) encryption standard
(which has been shown to have certain possible weaknesses), whereas WPA2
uses the stronger Advanced Encryption Standard (AES) in the Counter mode
with Cipher block chaining Message authentication code Protocol (CCMP),
which has received the US government's seal of approval for communications
up to the Top Secret security level. Since WPA2-PSK uses the same pre-shared
key mechanism as WPA-PSK, the same caveat against using insecure or
simple passwords applies.
6.1.5.1

WPS

WiFi-Protected Setup (WPS) is a standardized method of allowing wireless devices
to quickly and easily join wireless networks, while maintaining a good level of
security. The CGN2 provides two methods of WPS authentication:
85 85
HITRON CGN2 USER'S GUIDE
Version 2.0, February 2012. Copyright
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
2012 Hitron Technologies