Table 8: The Status > System Info Screen - Hitron CGN2 User Manual

The following table describes the labels in this screen.
Table 8: The Status > System Info Screen
Device Information
System Time
System Uptime
Model Name
SW Version
HW Version
RF MAC
Serial Number
RG Status
Wifi Status
NAT Status
DHCP Status
Firewall Status
35 35
HITRON CGN2 USER'S GUIDE
This displays the current date and time.
This displays the number of days, hours, minutes and
seconds since the CGN2 was last switched on or
rebooted.
This displays the device's model name.
This displays the version number of the software that
controls the CGN2.
This displays the version number of the CGN2's physical
hardware.
This displays the Media Access Control (MAC) address of
the CGN2's RF module. This is the module that connects
to the Internet through the CATV connection.
This displays a number that uniquely identifies the device.
This displays whether or not the CGN2 is in Residential
Gateway (RG) mode.
When the CGN2 is in Residential Gateway mode, ON
displays. When the CGN2 is not in Residential Gateway
mode, OFF displays.
This displays whether or not the CGN2's wireless network
is active.
When the CGN2's wireless network is active, ON displays.
When the CGN2's wireless network is not active, OFF
displays.
This displays whether or not the CGN2's Network Address
Translation (NAT) feature is active.
When NAT is active, ON displays. When NAT is not active,
OFF displays.
This displays whether or not the CGN2's DHCP server is
active.
When the DHCP server is active, ON displays. When the
DHCP server is not active, OFF displays.
This displays whether or not the CGN2's firewall is active.
When the firewall is active, ON displays. When the firewall
is not active, OFF displays.
Version 2.0, February 2012. Copyright
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
2012 Hitron Technologies