The Initialization Screen; Figure 8: The Status > Initialization Screen - Hitron CGN2 User Manual

Table 8: The Status > System Info Screen (continued)
Private LAN IP
Address
Subnet Mask
Uptime
Traffic Count
2.3

THE INITIALIZATION SCREEN

This screen displays the steps successfully taken to connect to the Internet over the
CABLE connection.
Use this screen for troubleshooting purposes to ensure that the CGN2 has
successfully connected to the Internet; if an error has occurred you can identify the
stage at which the failure occurred.
NOTE: This screen displays when you first log in to the CGN2.
Click Status > Initialization. The following screen displays.
Figure 8: The Status > Initialization Screen
37 37
HITRON CGN2 USER'S GUIDE
This displays the IP address of the CGN2's Ethernet
module. This is the IP address you use to connect with the
CGN2's admin interface via the LAN ports.
This displays the CGN2's LAN subnet mask.
This displays the number of hours, minutes and seconds
that the CGN2 has been connected to another device over
the LAN interface.
This displays the number of bytes received and sent on
the LAN interface.
Version 2.0, February 2012. Copyright
Version 2.0, February 2012. Copyright
2012 Hitron Technologies
2012 Hitron Technologies