Three-Wire Plug; Four-Wire Plug - Amana LED20AW-PLED20AW Installation Instructions Manual

Electrical Plug Connection...
-Three-Wire Plug Four-Wire Plug
I
D2841EOA
1. Remove access cover from
rear o1!dryer.
D2851EOB
2. Use a strain relief and insert
end of power cord through
power supply hole.
"LI" /Ill 11 _ NEUTRAL
TERM
._._INAL
)y_
TERL2NAL
_f_ D2861EOA
.
Use the three screws flom the
envelope located in the
cylinder to attach the power
cord wires to the terminal
block.
4. Tighten all screws and
reinstall access cover
removed in Step 1.
!
D2841EOA
l. Remove access cover from rear
of dryer.
GROUND
SCREW
D2871EOC
2. Remove ground screw and save
for use in Step 4. Remove wire
and use in Step 5.
POWER
CORD
WIRE
D288;EOB
3. Use a strain relief and insert end
of power cord through power
supply hole.
4. Attach power cord ground
(greta:) wire to rear bulkhead
using ground screw removed in
Step 2.
"LI"
TERMINAL
NEUTFIAL
TERMINAL
WHITE
.
"L2"
TERMINAL
BLACK
D2891EOC
Use the three screws from the
envelope located in the cylinder
to attach the remaining power
cord wires to the terminal block
as tol tows:
a. Red wire to "LI" terminal.
b. BIack wire to "[,2" terminal.
c. White wire to Neutral
te[minal.
NOTE: When installing the white
wire, loop the free eyelet end of
the ground wire (removed in Step
2) and atlach along with the white
wire to the neutral (center)
terminal on the terminal block.
6. Tighten all screws ;and reinstall
access cover remo,,ed in Step 1.
503953
13