Table of Contents
Advertisement
Technical Details
Troubleshooting
IMAGE IS BLURRED
Possible Causes
The Projector is not in focus
The Projector is offset from plane / angle of
operation
No Sync, No Signal
1.
Be sure to setup the computer to enable a video signal output. On
some laptops this is done by pressing and holding Function + F5 key.
If using the P300 as an external monitor on Windows based systems,
this can be done by selecting "extend my desktop to this monitor". The
native resolution of the P300 projector is 1280x800. Depending on the
video driver different resolutions may need to be selected for proper
output.
Chapter 4
Solution
Adjust the focus with the focus adjustment
dial until the image comes into focus
Move the projector so that it is both 180
degrees and on an even plane with the
screen.
37
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
