Menu item
Eco-Mode
Off
Energy
Energy/Paper
Paper
Quiet Mode
Off
On
Run Initial setup
Yes
No
Paper Sizes
US
Metric
Output Lighting
Normal/Standby Mode
Bright
•
Dim
•
Off
•
Power Saver
Bright
•
Dim
•
Off
•
Description
Minimizes the use of energy, paper, or specialty media
Notes:
Off is the factory default setting. Off resets the printer to its
•
factory default settings.
The Energy setting minimizes the power used by the printer.
•
Performance may be affected but not print quality.
Paper minimizes the amount of paper and specialty media
•
needed for a print job. Performance may be affected but not
print quality.
Energy/Paper minimizes the use of power and of paper and
•
specialty media.
Reduces the amount of noise produced by the printer
Notes:
Off is the factory default setting.
•
On configures the printer to produce as little noise as possible.
•
Instructs the printer to run the setup wizard
Notes:
Yes is the factory default setting.
•
After completing the setup wizard by selecting Done at the
•
Country select screen, the default becomes No.
Notes:
Initial setting is determined by your Country selection in the
•
initial setup wizard.
Changing this setting also changes the Units of Measurement
•
setting in the Universal Setup menu and the default for each
input source in the Paper Size/Paper Type menu.
Sets the amount of light from an optional output bin
Notes:
In Normal/Standby Mode, the factory default is Bright.
•
In Power Saver Mode, the factory default is Dim.
•
Understanding printer menus
125