Ricoh InfoPrint 1832 User Manual page 42

2
Insert the Software and Documentation CD.
3
Click Install.
4
Click Agree.
5
Click Suggested.
6
Click Wireless Network Attach.
7
Connect the cables in the following order:
a
Temporarily connect a USB cable between the computer on the wireless network and the printer.
Note: After the printer is configured, the software will instruct you to disconnect the temporary USB cable
so you can print wirelessly.
b
If your printer has faxing capabilities, then connect the telephone cable.
8
Follow the on-screen instructions to complete the software installation.
9
To allow other computers on the wireless network to use the wireless printer, follow steps 2 through 6 and step
8 for each computer.
Additional printer setup
40