Kenmore 79045482503 Installation Instructions Manual page 2

NOTES:
1.Do not pinch the power supply cord between the range and the wall.
2. Do not seal the range to the side cabinets.
3.24" (61 cm) minimum clearance between the cooktop and the bottom of the cabinet when
the bottom of wood or metal cabinet is protected by not less than 1/4" (0.64 cm) flame retardant
millboard covered with not less than No. 28 MSG sheet metal, 0.015" (0.4 mm) stainless steel,
0.024" (0.6 mm) aluminum, or 0.020" (0.5 mm) copper. 30" (76.2 cm) minimum clearance
when the cabinet is unprotected.
4.Allow at least 20" (50.1 cm) clearance for door depth when it is open.
Smoothtop Models
48" (122 cm)
Armored
Cable
NOTE: Two sets of holes are provided
under anti-tip bracket. Bracket is attached in
the upper hole position at the factory. Refer
also to page 6, item 9 for additional
details.
261/2"
(67.3 cm)
Door open
(see note 4)
Side Panel
/
/
/ /
Figure 1
22 718" *
(58.1 cm) rain.
23 1/4"*
59.05 cm) max_
i
_/ _ 1 1/8"
/ (2.86 cm)
B Ref.
FRONT
OF
CABINET
* For cutouts below 22 7/8", appliance
will slightly show out of tt_e cabinet.
A: CutoutW!dth I B, Cutout Depth' C, Heightof
(Countertop and , (According to front Cutout
Cabinet), of cabinet),
30 _+1/16" 21 3/4" (55,2 cm) rain 29" (73,7 cm)
(76,2 _+0,15 cm) 22 1/8" (56,2 cm) max