Advertisement
COIN BOX OPTIONS
t:O
;11710
¸--.¸ elf'
Electrical
Shock Hazard
Disconnect
power before servicing,
Replace all parts and panels before operating.
Failure to do so can result }n death or electr}cal
shock.
You can install the 30-minute or 60-minute timing cam (shipped
with dryer) as follows:
1° Unplug dryer or disconnect power.
2, Unlock meter case.
3, Turn the timing cam by hand until the V-shaped notch lines up
below the ratchet tooth.
NOTE: For any other type of money-accepting
device, please see
the manufacturer's instructions to change vend price.
Electricam Shock Hazard
Disconnect
power before servicing,
Replace all parts and panels before operating.
Failure to do so can result in death or electdcam shock.
1° Unplug dryer or disconnect power,
NOTE: Place all screws and other items removed from coin slide
assembly on a cloth so they will not get lost,
2, Remove service door from meter case,
3, Remove chute bolt from slide mechanism and remove slide
mechanism from meter case.
B. Timing cam
C. 77metShaft
O. Drive lug
E, V-shaped notch
4, Insert a narrow, fiat-blade screwdriver under the timing cam
near the timer shaft. Gently lift cam straight up and off shaft
making sure that the V-shaped notch clears the ratchet tooth,
5, Place new cam (hub side down) over clock shaft. Line up flat
side of shaft with flat side of cam hole. Check that drive lug is
in place,
6, Turn cam until V-shaped notch lines up with ratchet tooth,
7° Press cam down in place on motor shaft. Make sure that
V-shaped notch clears the ratchet tooth,
8, Close and lock the meter case,
9, Plug in dryer or reconnect power.
4_
5,
A. Chute bolt
B. Coin slide mechanism
C. Access
Unhook and remove slide return spring.
Place coin(s) in coin slot(s) and >ash forward all the way,
Remove 2 screws securing buffer and detach buffer.
A
i i
I
,j i _,
(
=
I
"
}
/I
_:
if
;;_
z
h
*¢-
_
i !-_' }i:-/L
:
.... I
A, Buffer
17
Advertisement
