Download Print this page

Kenmore 66515692K210 Installation Instructions Manual page 11

Stainless steel tub undercounter dishwasher

Advertisement

Available languages

Available languages

Option
D, No waste disposer - with air gap
1. Connect rubber end of drain hose
to air gap and cut if needed.
NOTE: Do not cut ribbed section.
2.
Attach
drain
hose to air gap with
large
blue drain
hose clamp
(provided).
Use pliers to squeeze
clamp
open and move into position.
If the drain
hose was cut, use a 11/2"
to 2" (3.8 to 5.1 cm) screw-type
clamp
(not provided).
3.
Use a rubber hose (not provided)
with screw-type clamps (not
provided)
to connect from waste
tee to air gap.
Tip Over Hazard
Do not use dishwasher
until completely installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.
Remove
and discard
the foam
blocks
located
above
the front
legs on each side of the dishwasher.
The blocks
cover
the rope/
link pulleys
on the dishwasher.
11

Hide quick links:

Advertisement

loading