Technical Specifications - Alto MISTRAL2500 User Manual

5. TECHNICAL SPECIFICATIONS

MODEL
Output Power
20Hz 20KHz@0.1%THD, Stereo Mode
8 ohms per channel(EIAJ)
4 ohms per channel(EIAJ)
Bridge Mono Mode
8 ohms, 1KHz, 0.1%THD
Distortion (SMPTE-IM)
Frequency Response
Damping Factor, 1 kHz and below
Signal to Noise,20Hz-20KHz
Voltage Gain
Input Sensitivity @ 4 ohms
Input Clipping
Input Impedance
Controls
Indicators (1 per channel)
Connectors, each channel
Cooling
Load Protection
Power Requirements
Dimensions
Net Weight
MISTRAL2500
450W
700W
1400W
<0.05%
20Hz-20KHz 1dB, -3dB points: 10Hz-60KHz
>300 at 8ohms
102dB
40x (32dB)
1Vrms
10Vrms (+22dB)
10K ohms unbalanced, 20K ohms balanced 56 (36dB)
FRONT: AC SWITCH, CH1 & CH2 GAIN KNOBS
REAR: LIMITER, BRIDGE SELECTOR
Power-On: Blue LED
Operation/Protection : Dual Color (Green/Red LED)
Limit: Red LED
Clip: Red LED
Input: Active balanced XLR
Parallel Output : XLR
R
Output: NEUTRIK Speakon and Binding posts
Continuously variable-speed fan, rear-to-front air flow
On/off muting, DC-fault load grounding relay. Internal fault fuses.
200-240(100-120) Vac 50~60Hz
19" (48.3 cm) rack mounting, 3.5" (8.9 cm) tall (2 rack spaces),
15.9" (40 cm) deep (rack mounting to rear support ears)
20.3Kg
11
PRELIMINART