Technical Specifications - Alto Mistral 400 User Manual

5. TECHNICAL SPECIFICATIONS

TYPE
Stereo Mode - (4 ohms)
(EIAJ)
Stereo Mode - (4 ohms)
(RMS)
Distortion (SMPTE-IM)
Frequency Response
Damping Factor, 1 kHz and below
Signal to Noise, 20 Hz-20 kHz
Voltage Gain
Input Sensitivity @ 4 ohms
Input Clipping
Input Impedance
Controls
Indicators (1 per channel)
Connectors, each channel
Load Protection
Power Requirements
Dimensions
Net Weight
MISTRAL 400
100W
x 2
70 W
x 2
<0.05%
20 Hz-20 kHz 0.1/-3 dB
>300 at 8 ohms
102 dB
40 x (32 dB)
1 Vrms
10 Vrms (+22 dB)
10K ohms unbalanced, 20K ohms balanced 56 (36 dB)
FRONT: AC SWITCH, CH1 & CH2 GAIN KNOBS
REAR: LIMITER, BRIDGE SELECTOR
Power-On: Blue LED
Limit: Yellow LED
Clip: Red LED
Input: Active balanced XLR and 1/4" TRS jack
Output: NEUTRIK Speakon and 1/4" TRS jack
On/off muting, DC-fault load grounding relay, internal fault fuses
220-240 (110-120) Vac 50~60 Hz
19" (48.3 cm) rack mounting, 1.7" (4.4 cm) tall (1 rack spaces)
11" (28 cm) deep (rack mounting to rear support ears)
6.5 Kg
7