Table of Contents
Advertisement
PARTS, TOOLS, MATERIALS
YOU WILL NEED THE FOLLOWING
TOOLS
AND MATERIALS
FOR THE
INSTALLATION:
Carton or other heavy material for covering the counter top.
Clear Tape
(for taping the templates to the wall)
Stud Finder or Thin Nail
Saber Saw (for cutting vent holes for roof
or wall vending)
Phillips Screwdriver (for the screws)
Pencil
Flat Blade Screwdriver (for the toggle bolts)
Measuring Tape (metal preferred)
Keyhole Saw (for the power cord hole)
1/2" and 3/16"
drill bits
,,.,,=,=====
Plumb Line
Duct Tape
Small Side Cutters or Tin Snips
Caulking gun
* If you have brick or masonry walls, you need special hardware and tools.
* The ductwork you need for the installation is not included. All wall and roof caps must have a back-draft
damper.
Hide quick links:
Advertisement
Table of Contents
