Mounting On A Rifle - Newcon Optik NVS 14 Operation Manual

You can raise the unit for unobstructed view without taking the
helmet off. To do so press (and hold) the button (2, Fig.6) and
rotate the unit until you hear a click.
All other operations with the unit mounted on a helmet are
identical to those with the headgear.
6.14

Mounting on a rifle

The unit can be mounted on a rifle with Picatinny mount adapter
(MIL-STD-1913). The optical axle of the monocular coincides
with the rifle's Picatinny rail.
FIGURE 7. NVS 14
with Picatinny adapter.
Two types of weapon mount adapters are available – Fig.7 and
Fig. 8. Either adapter enables mounting the unit to the Picatinny
rail. The type shown on Fig. 7 has two screws with large grooved
heads for convenient tightening.
Note: Over tightening the screws may damage the thread.
The 'Quick Release' model (Fig. 8) utilizes a latch with a spring
and patented accu-torque screw. You can attach and detach your
monocular within a few seconds. The accu-torque screw fixes the
mount with predefined torque thus protecting the thread from
accidental damage caused by over tightening.
20