OnQ Technologies 925 Owner's Manual page 91

12:00 AM
1=TIME
Select 1 (TIME) to enter the new time. If the desired time is the time in which sunrise or sunset
will occur, press the up arrow key for sunrise, or the down arrow key for sunset before entering a
time.
TIME: 12:00 AM
HHMM
You may also choose to have the program execute up to 120 minutes before or after the time of
sunrise or sunset.
SUNSET
1=BEFORE
If the 1(BEFORE) or 2(AFTER) key is selected, you will be prompted to select the amount of
minutes:
ENTER OFFSET:
0-120 MINUTES
When entering a time of day, AM/PM must be specified for the time if the AM/PM format is
being used. Otherwise the entered time should be 13:00-23:59.
TIME:
HHMM
Select 2 (DATE/DAY) to enter a new date or days of week.
DATE: 10/15
MMDD
Next, specify if the program will run once (on the specified date and then be deleted) or if the
program will run every year on the specified date (yearly).
RUN PROGRAM
1=ONCE
To change days, press the down arrow (DAY) key. You will be prompted to enter the day(s) that
the program will be activated. Press 1-7 for Monday - Sunday, 0 for Once, 8 for Weekdays, and 9
for Weekends, then ' # '.
5/17
2=DATE/DAY
↑ ↓
=RISE/AM =SET/PM
2=AFTER #=AT
8:00 AM
↑ ↓
=RISE/AM =SET/PM
↓
=DAY
2=YEARLY
OnQ Technologies, Inc. 83