OnQ Technologies 925 Owner's Manual page 49

You will be prompted with the first named temperature zone (i.e. Upstairs). The temperature zone
can be specified by entering the temperature zone number followed by the ' # ' key, or by pressing
the arrow keys to scroll through the list of temperature zones. Press the ' # ' key when the desired
temperature zone is shown. Temperature zones 1-4 are for OnQ thermostats.
TEMPERATURE:
ENTER TEMPERATURE ZONE
After the ' # ' key is pressed, a menu appropriate for the type of temperature zone is shown. For
Celsius temperatures, press the ' # ' key prior to entering the temperature to make the number
negative. The Celsius temperature may also be specified in 0.5 degree steps, if three numeric
digits are entered. The third digit adds a .5 to the first two digits, if it is anything other than zero.
Enter a leading zero, if necessary.
For OnQ heat/cool thermostats:
Upstairs
1=MODE
Upstairs
4=FAN
For OnQ heat only thermostats:
Upstairs
1=MODE
Upstairs
4=FAN
For OnQ cool only thermostats:
Upstairs
1=MODE
Upstairs
4=FAN
For OnQ setpoint only thermostats (no Mode or Fan controls):
Upstairs
2=TEMP
↓
↓
2=HEAT 3=COOL
↑
5=HOLD #=STAT
↓
2=HEAT
↑
5=HOLD #=STAT
↓
2=COOL
↑
5=HOLD #=STAT
5=HOLD #=STAT
OnQ Technologies, Inc. 41