OnQ Technologies 925 Owner's Manual page 47

Leave for Work (Button 1):
- turn off all lights
- set-back thermostat temperatures
- arm the security system in the Away mode
Dinner for Two (Button 2):
- dim the dining and living room lights
- turn on the porch light
- turn off all the bedroom lights
- dim the den light
- turn on the stereo
Go to Bed (Button 3):
- turn off all lights
- dim outdoor lights 20% to extend bulb life and reduce consumption
- arm security in ASLEEP mode
To activate a preprogrammed button, from the top-level display or from the main menu, press the
3 (BTTN) key on the keypad. Select the button (macro) to be activated by using the arrow keys to
scroll through a list of buttons, followed by the ' # ' key.
NOTE: Remember to look for "SYSTEM OK" on the display before using a macro to arm the
security system.
For extra convenience, certain buttons are automatically activated when you change security
modes, or when security zones open and close. This powerful feature allows you to set your
system up so that control functions are performed when you arm your security system (such as
turning off all lights and setting back the HVAC system). Door contacts and motion detectors can
be used to turn on lighting automatically, then turn it off a few minutes after the person has left,
and then only if it's dark.
OnQ Technologies, Inc. 39