OnQ Technologies 925 Owner's Manual page 51

The fan control on a thermostat may be switched between on and auto by selecting 4 (FAN) from
the temperature menu:
Upstairs FAN
0=AUTO
Thermostats may be switched between hold mode and the normal run mode. While in hold mode,
the thermostat does not respond to scheduled temperature changes but instead maintains the
temperature at its current setting. The thermostat will then return to its scheduled operation setting
once hold mode is removed.
The hold menu is used to control hold status of a thermostat. The hold menu is entered by
selecting 5 (HOLD) at the temperature menu. Through this menu you may turn hold mode on and
off.
For a heat/cool thermostat, the menu displayed is:
Upstairs HOLD
0=OFF
Turn hold mode Off or On by selecting 0 (OFF) or 1 (ON), respectively.
For a heat/cool thermostat, the status shows the current temperature, the heating and cooling
temperature setpoints, whether hold mode is on, the system mode, and the fan On/Auto selection.
Upstairs
HEAT: 70
Upstairs
MODE: AUTO
If hold mode is On, "HOLD" is shown:
Upstairs
MODE: AUTO
1=ON
1=ON
TEMP: 78
↓
COOL: 78
↑
FAN: AUTO
HOLD
↑
FAN: AUTO
OnQ Technologies, Inc. 43