Connection terminals accepts up to 12 gauge speaker wire Quick mounting system for new construction or retrofit Includes hole template and paint mask Ceiling Bracket for New Construction: Jobsite NCB-6 (sold separately) PRODUCT OVERVIEW The illustration shows how a Ceiling Bracket serves as a "hole saver"...
PREPARING FOR INSTALLATION 2. Mark ceiling joists' edges, using masking tape. If you are installing the LSC-6S into an existing ceiling, take time to consider any 3. You may have to adjust the loudspeaker possible obstructions which may be hidden...
Page 5
12. Insert the loudspeaker into the cutout in the ceiling. Removing the Grilles: 13. The dogs are tightened via four To remove the grille from the LSC-6S, obtain front-baffle screws. lighten the dogs a small paper clip (size #1, common) and by turning the screws clockwise, bend the last quarter inch of it into an "L"...
SPECIFICATIONS Painting the Grilles Power handing: The LSC-6S grille should be painted before 10 -100 watts it is installed on the speaker. The best Frequency response: results will be obtained by using a spray 60Hz-21kHz gun or airless sprayer. Thin the paint, and then apply several light coats.
JOBSITE, in which case JOBSITE will repair or replace, at its sole option, the defective product JOBSITE warrants its indoor/outdoor without charge for parts or labor.