Connection terminals accept up to 12 gauge speaker wire Quick mounting system for new construction or retrofit installations Includes hole template and paint mask Ceiling Bracket for New Construction: Jobsite NCB-6 (sold separately) FEATURES: LSC-6.5 6-1/2” Injection-molded polypropylene woofer with butyl rubber surround 1”...
If you are installing the speakers into a new ceiling follow the above recommendations and install a set of JobSite NCB-6 Ceiling Brackets, prior to the drywall being installed. Run speaker wire from each location to the amplifier location. Label the speakers wires at the amplifier end, so you know which wire goes to each speaker.
10. Tightly twist the end of each wire until no frayed ends remain. 11. Attach the speaker wires to the speaker terminal connectors. Connect the negative output from the amplifier to the black terminal and the positive output to the red terminal.
Listen to a well-recorded piece of music at the user’s favorite listening position. First, listen for bass boominess, particularly when the speaker is placed near a corner. Put the Bass switch in the Cut position to correct this. Secondly, listen for treble harshness or ringing, particularly when the speakers are placed in a room without carpet.
SHIPPING INSTRUCTIONS FROM JOBSITE. If the above conditions are met, the purchaser’s sole remedy shall be to return the product to JOBSITE, in which case JOBSITE will repair or replace, at its sole option, the defective product without charge for parts or labor.
Need help?
Do you have a question about the LSC-6 and is the answer not in the manual?
Questions and answers