The Internet Screen; Figure 21 Interface Setup > Internet; Table 11 Interface Setup > Internet - ZyXEL Communications P-660RU-Tx User Manual

Chapter 7 Internet Setup

7.2 The Internet Screen

Use this screen to change your P-660RU-Tx's WAN settings. Click Interface
Setup > Internet.
encapsulation you select.
Figure 21 Interface Setup > Internet
The following table describes the labels in this screen.
Table 11 Interface Setup > Internet
LABEL
ATM VC
Virtual Circuit
PVCs
Summary
Status
VPI
VCI
62
The Dynamic IP Address part of this screen differs by the
DESCRIPTION
Select the PVC you want to configure from the drop-down list box.
Click this to display a summary table of the PVC settings on your P-
660RU-Tx. See Section 7.2.5 on page 70
Use this field to enable or disable the PVC.
Virtual Path Identifier (VPI) defines a virtual circuit. Refer to the
appendix for more information. Enter the VPI assigned to you.
Virtual Channel Identifier (VCI) defines a virtual circuit. Enter the VCI
assigned to you. Refer to the appendix for more information.
for more details.
P-660RU-Tx User's Guide