Installing Ink Cartridges - ENCAD 215360-01 Quick Start Manual

4 Inspect the IC chip on the cartridge. Make sure it is secure and in
approximately the location shown on the following figure. If any
cartridge is damaged, contact an authorized dealer for return/
replacement of the defective cartridge.

Installing ink cartridges

Your printer uses cartridges that were specifically designed for it. They are not
compatible with cartridges designed for other printer models. Use of other
cartridges may damage the printer and/or prevent it from printing. Ink cartridges
ship prefilled with ink and preprimed. Be sure all cartridges and reservoirs use
the same ink type. If you are using the shipping cap cartridges, you will remove
the shipping cap before installing the cartridge. If you are using the needle
assembly cartridge, you will leave the needle assembly connected and install the
cartridge.
! Do not touch the jet area or the flex contact area of the ink cartridge.
! Work with only one ink color at a time to prevent contamination.
! Ensure that you have cartridges in all eight stalls. The printer will not
print unless there are cartridges in all stalls.
! Caution: Never manually move the carriage. Injury can result from
unintentional carriage movement.
To install ink cartridges
1 With printer power on, press Utility Menu/Access Menu/Access
Left or Access Right to move the carriage to the position which
allows replacement of the ink cartridges. (Use Access Left if you are
working on the left bank of cartridges or Access Right for the right
bank of cartridges.)
NovaJet 800 Series Printer Quick Start Guide
Flex
Contact
Area
Jet Area
Cartridge
Recognition
Chip
29