NovaJet 800 Series Printer Quick Start Guide
To load roll media
1
Slide the media guide over the feed roller into the media core, and
secure it by tightening the locking mechanism.
2
Mount an empty media core on the takeup roller before inserting the
roller into the stand. Mount the two rollers as shown below. Insert the
end of a roller into the space provided in the left roller support, then fit
the other end of the roller into the right support. Make sure the gear
on the roller is engaged with the gear on the support.
Takeup
16
Tighten to secure
media roll
Feed roller
roller