Choosing Menu Functions; Setting The Language; Loading Media - ENCAD 215360-01 Quick Start Manual

Choosing menu functions

To select a function, press the button adjacent the function displayed.
The display will list options available for the selected function. Press the button
for the option you want and press OK to accept the selection.
Depending on the type of menu, you can return to the previous menu level by
pressing the OK or Exit button. There is no way to immediately return to the
top level menu.
Press the Cancel button to restore the previous setting and exit the menu.
Refer to the Reference Guide on the System CD for a description of all the
menu features.

Setting the language

With the appropriate firmware version, your printer can display menu items and
messages in English, German, French, Italian, Portuguese, Spanish, Japanese,
Simplified Chinese, Traditional Chinese or Korean.
To change the language
1 Press Setup Menu/User Setup Menu/Language, and select the
language you want.
2 Press OK.

Loading media

You can use either roll or single sheet media. To ensure straight paper loading
and avoid skewing, be sure to hold the media parallel to the platen. Use the
load lines on the platen as a guide to correctly align the media. Be sure to load
from the back only. Set the media guides to the width of the media.
Note: Instructions for loading media on the NovaJet 880 follows this section.
! IMPORTANT! It is very important to use only ENCAD media with your
printer. Some third party media has been found to generate electrostatic
discharge in excess of 20,000 volts. Emissions of this level can cause arcing
between the lower roller and printer leg.
! Depending on the model, the printer can use media up to 60" wide. The rolls
can be heavy, so you may want to have someone help you to load them.
! If your roll media has wrinkled or damaged edges, cut off the damaged part of
the roll prior to loading to prevent the media from jamming in the printer.
NovaJet 800 Series Printer Quick Start Guide
15