Inspecting The Ink Cartridges - ENCAD 215360-01 Quick Start Manual

NovaJet 800 Series Printer Quick Start Guide

Inspecting the ink cartridges

There are two types of cartridges that could be shipped with your printer. One
type of cartridge has a small shipping cap on the top. The other type of cartridge
has a needle assembly connected to the top of the cartridge. Through the
remainder of this guide, we'll identify the two cartridges as either the shipping
cap cartridge or the needle assembly cartridge. Visually inspect each cartridge
before installing.
Shipping Cap
To inspect the ink cartridges
1 Check for leakage in the sealed bag the cartridge was shipped in. If
you detect any leakage, do not attempt to use the cartridge.
Return the cartridge in the sealed bag for a warranty replacement.
2 Remove the cartridge from the sealed bag. Make sure the blue tape
is intact on the jet area of the cartridge. Do not remove the tape at
this time! The tape will be removed later.
3 Remove the tape securing the needle assembly to the side of the
cartridge, if you have the needle assembly cartridge.
28
Cartridge
Needle Assembly
Cartridge