Two (2) fibers Detachable Connection with BR-500, Certifications DisplayPort 1.2 Extender Pictorials Figure 1 – Overall Connection of DPFX-200-TR Figure 2 – Position of the LED Figure 3 – Fiber numbering on product label Figure 4 – Connection of optical fiber Figure 5 –...
Congratulations on your purchase of the two (2) fibers DisplayPort extender, □ Hardware requirements DPFX-200-TR. This manual contains information that will assist you in ▪ You must have a DisplayPort source and display. It should installing and operating the product.
Step 3 The Power LED will be turned on when DPFX-200-TR is connected to DisplayPort interface of signal source and display and the Status LED will blink three (3) times.
Ensure that the cables and power modules are stored or used in a benign environment free from liquid or dirt contamination. There are no user serviceable parts. Refer all service and repair issues to Opticis or its authorized distributor.
If a product does not work as warranted during the applicable warranty period, 21.6Gbps (5.4Gbps per lane). Opticis shall, at its option and expense, repair the defective product or part, del iver to customer an equivalent product or part to replace the defective item, or r ...
Tel: +82 (31) 719-8033 Fax: +82 (31) 719-8032 www.opticis.com Figure 7 – Connection of DPFX-200 and BR-500 *Note: BR-500 is applicable to use with Opticis DisplayPort 1.2 fiber-optic transmitters ONLY. For order support, please contact your Distributor or Reseller. Certifications For technical support, check with the Opticis web site www.opticis.com or...