Specific Safety Precautions - pro.point 1" User Manual

V 2.0

SPECIFIC SAFETY PRECAUTIONS

1. Do not over-tighten nuts. They could shatter and cause damage to the tool or work piece or cause serious injury.
Use a torque wrench to torque the nut after using the impact wrench.
2. Do not use any additional force upon the wrench in order to remove a nut.
3. Do not allow wrench to run without load for an extended period of time as this will shorten its life.
4. This impact wrench should only be used with impact sockets and extensions. Use of other accessories can cause
them to break, causing permanent damage to the unit and severe injury to the operator.
TOOL USE AND CARE
1. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger
industrial tool. The tool will perform better and more safely at the task for which it was intended. Do not modify
this tool or use for a purpose for which it was not designed.
2. Securely hold this tool using both hands. Using tools with only one hand can result in loss of control.
3. Maintain tools with care. Keep tools clean and in good condition for a better and safer performance. Follow
instructions for lubricating and changing accessories. Inspect tool fittings, alignment and hoses periodically and,
if damaged, have them repaired by an authorized technician or replaced. The handles must be kept clean, dry
and free from oil and grease at all times. A properly maintained tool reduces the risk of binding and is easier to
control. Applying excessive force can lead to slips and damage to your work or personal injury.
4. Avoid unintentional starts. Be sure that the throttle is in neutral when not in use and before connecting it to any
air source. Do not carry the tool with fingers near or on the switch.
5. Only use the lubricants supplied with the tool or specified by the manufacturer. Other lubricants may not be
suitable and may damage the tool or even make the tool explode.
6. When not in use for an extended period, apply a thin coat of lubricant to the steel parts to avoid rust.
7. Maintain the label and name plate on the tool. These carry important information. If unreadable or missing,
contact Princess Auto for a replacement.
For technical questions call: 1-800-665-8685
1" Impact Wrench with 6" anvil 8380206
5