Specifications; Important Safety Precautions; Work Area - pro.point 1" User Manual

V 2.0
1" Impact Wrench
with 6" anvil

SPECIFICATIONS

Max torque
Working torque
Average air consumption
No load speed
Max. air pressure
Air inlet
Air hose
Drive size
* The actual torque delivered at each setting will depend on the air pressure supplied to the tool. Test the actual torque by
tightening a nut or bolt at each setting, then observing the resultant torque with a mechanical torque wrench (not included).
INTRODUCTION
Through precision machining and high quality componentry, this 1" square drive impact wrench has the power to
deliver up to 2,000 ft-lb of torque. Twin hammer construction and a lightweight composite body provide reliable
continuous torque with less vibration and fatigue for users. The extended 6" anvil allows you to work in tight areas.

IMPORTANT SAFETY PRECAUTIONS

WARNING! Read and understand all instructions before using this tool. Keep this manual for the safety warnings
and precautions, operating, inspection and maintenance instructions. When using this tool, basic precautions
should always be followed to reduce the risk of personal injury and/or damage to the equipment. Note that when
this manual refers to a part number, it refers to the parts list included. Before allowing someone else to use this tool,
make sure they are aware of all safety information.

WORK AREA

1. Keep your work area clean and well lit. Cluttered and dark areas invite accidents.
2. Operate in a safe work environment. Do not use air tools in damp or wet locations. Do not expose to rain.
Do not use power tools in the presence of flammable gases or liquids.
3. Keep children, bystanders and visitors away from the work area. Do not let them handle tools or extension
cords. No one should be in the work area if they are not wearing suitable protective equipment.
4. Store unused equipment. When not in use, tools must be stored in a dry location to prevent rust. Always lock up
tools and keep them out of reach of children.
For technical questions call: 1-800-665-8685
2,000 ft-lb
1,500 ft-lb
9.1 CFM @ 100 PSI
5,000 RPM
150 PSI
1/2" NPT
1/2" I.D.
1" square drive with 6" extended anvil
8380206
3