Eight-, 12-, Or 24-Bottle Sampling - Hach 900 MAX Instrument Manual

Section 2
Figure 10 Two-bottle Locations
1. Single Bottle Location
Figure 11 Four-bottle Locations
1. 1, 2, or 4 Bottle Locations

2.5.3 Eight-, 12-, or 24-bottle Sampling

Page 28
Setting Up the Bottles
For four-bottle sampling, install the distributor and place all four bottles in the
tray as shown in Figure
1
1
Front
2. Two Bottle Location
2 3
4
1
Front
2.
For eight-, 12- or 24-bottle sets, install the distributor (refer to
page 30). Place the bottles in the tray and install the proper bottle retainer
(Figure 12).
Bottle #1 is the first bottle clockwise (looking down on the tray) from the right
side of the tray. Bottle #1 is located on the inside of each bottle tray for all
multiple bottle sets (Figure
11.
2
2
3
3. Slots for Wire From Bottle Tray (8 or 24 bottle)
1
2
Slot for Wire From Bottle Tray (8 or 24 bottles)
12).
section 2.6.1 on
8990hrd.fm