Grizzly G9972Z Owner's Manual page 40

G1070—MT3 Live center Set
a super blend of quality and convenience, this
live center set offers seven interchangeable tips.
high-quality needle bearings prolong tool life
and special tool steel body and tips are precision
ground. supplied in wooden box.
figure 54. g1070 Live Center set.
H7540—Metalworking Kit No. 1
get started with the practical lathe kit that includes
the following hand essentials:
• double-ended boring bar with holder and two
⁄ " hss tool bits
1
4
• two round head fly cutters
• six-head knurling tool
• double-ended knurling tool
• straight turning tool holder with
bit
• Cut-off tool holder with three hss blades
• hex wrenches
• protective wooden case
figure 55. Model h7540 Metalworking Kit no. 1.
-38-
G1075—52-pc. clamping Kit,
our clamping kits are among the best in the world!
all the blocks, bolts, nuts, and hold-downs are
case hardened. this clamping kit includes: 24
studs, 6 step block paris, 6 t-nuts, 5 flange nuts,
4 coupling nuts, and 6 end hold-downs. the rack
can be bolted to the wall or side of the machine
for easy access.
G9256—6" Dial caliper
G9257—8" Dial caliper
G9258—12" Dial caliper
these traditional dial calipers are accurate to
0.001" and can measure outside surfaces, inside
surfaces, and heights/depths. Features stainless
steel, shock resistant construction and a dust
proof display. an absolute treat for the perfection-
ist!
⁄ " hss tool
5
16
figure 56. g1075 52-pC. Clamping Kit.
figure 57. grizzly
®
G9972Z 11" x 26" Lathe w/Gearbox
⁄ " T-Nut
1
2
dial Calipers.